NEO·T Series T90 - 技术规格
NEO·T Series T90 机器概述
Tederic NEO·T Series T90 肘杆式 注塑机 锁模力为 900 kN (90 metric tons). This is a smaller capacity machine within the NEO·T Series series.
This model offers 3 screw diameter options (35mm, 38mm, 42mm). Shot weight (PS) ranges from 153g to 221g. Injection pressure from 158.2 MPa to 227.9 MPa. Injection rate from 106 g/s to 153 g/s.
Mold opening stroke: 340mm. Tie bar spacing: 360×360mm (width × height). Maximum daylight: 730mm. Mold height range: 150mm to 390mm.
Overall machine dimensions: 4.34×1.3×2 m (L×W×H). Machine weight: 3.5 t.
The NEO·T Series series includes 12 models with clamping forces from 900 kN to 10500 kN (90-1050 metric tons). A total of 36 injection unit configurations are available in this series.
非常适合 包装、家用电器和中型技术零件成型.
合模单元: T90
注射单元: i380
变体 (3)
| 参数 | 变体 A | 变体 B | 变体 C |
|---|---|---|---|
| 螺杆直径 | 35 mm | 38 mm | 42 mm |
| 长径比 | 21.7 | 20 | 18.1 |
| 射胶容量 | 168 cm³ | 198 cm³ | 242 cm³ |
| 射胶重量 (PS) | 153 g | 181 g | 221 g |
| 注射压力 | 228 MPa | 193 MPa | 158 MPa |
| 注射速率 | 106 g/s | 125 g/s | 153 g/s |
设备与选项
设备与选项
Similar Machines by Clamping Force
Other Tederic models with clamping force around 900 kN from different series.
E90II
900 kN(90t)
All-Electric
18 screw variants
NEO T lite SeriesT90
900 kN(90t)
Toggle Clamp
3 screw variants
DE SeriesDE85
850 kN(85t)
All-Electric
6 screw variants
DT SeriesD100
1000 kN(100t)
Toggle Clamp
3 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Complete Guide to Injection Molding Machines
Comprehensive overview of machine types, selection criteria, and key specifications.
Read moreProduction Cycle Optimization
Strategies to improve efficiency and reduce cycle times in injection molding.
Read moreInjection Molding Defects: Identification & Solutions
Common defects, their causes, and practical solutions for quality improvement.
Read more