NEO·T Series T500 - 技术规格
NEO·T Series T500 机器概述
Tederic NEO·T Series T500 肘杆式 注塑机 锁模力为 5000 kN (500 metric tons). This is a mid-range capacity machine within the NEO·T Series series.
This model offers 3 screw diameter options (75mm, 80mm, 85mm). Shot weight (PS) ranges from 1624g to 2086g. Injection pressure from 159.9 MPa to 205.3 MPa. Injection rate from 452 g/s to 581 g/s.
Mold opening stroke: 800mm. Tie bar spacing: 820×820mm (width × height). Maximum daylight: 1600mm. Mold height range: 320mm to 800mm.
Overall machine dimensions: 8.1×2.17×2.65 m (L×W×H). Machine weight: 19.8 t.
The NEO·T Series series includes 12 models with clamping forces from 900 kN to 10500 kN (90-1050 metric tons). A total of 36 injection unit configurations are available in this series.
非常适合 包装、家用电器和中型技术零件成型.
合模单元: T500
注射单元: i3800
变体 (3)
| 参数 | 变体 A | 变体 B | 变体 C |
|---|---|---|---|
| 螺杆直径 | 75 mm | 80 mm | 85 mm |
| 长径比 | 23.5 | 22 | 20.7 |
| 射胶容量 | 1,785 cm³ | 2,031 cm³ | 2,293 cm³ |
| 射胶重量 (PS) | 1,624 g | 1,848 g | 2,086 g |
| 注射压力 | 205 MPa | 181 MPa | 160 MPa |
| 注射速率 | 452 g/s | 514 g/s | 581 g/s |
设备与选项
设备与选项
Similar Machines by Clamping Force
Other Tederic models with clamping force around 5000 kN from different series.
D500
5000 kN(500t)
Toggle Clamp
3 screw variants
NEO T lite SeriesT500
5000 kN(500t)
Toggle Clamp
3 screw variants
J type SeriesDT500/JI15000
5000 kN(500t)
Hydraulic
1 screw variants
J type SeriesDT500/JI15000
5000 kN(500t)
Hydraulic
1 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Complete Guide to Injection Molding Machines
Comprehensive overview of machine types, selection criteria, and key specifications.
Read moreProduction Cycle Optimization
Strategies to improve efficiency and reduce cycle times in injection molding.
Read moreInjection Molding Defects: Identification & Solutions
Common defects, their causes, and practical solutions for quality improvement.
Read more