NEO·T Series T160 - 技术规格
NEO·T Series T160 机器概述
Tederic NEO·T Series T160 肘杆式 注塑机 锁模力为 1600 kN (160 metric tons). This is a smaller capacity machine within the NEO·T Series series.
This model offers 3 screw diameter options (42mm, 45mm, 50mm). Shot weight (PS) ranges from 284g to 402g. Injection pressure from 157.7 MPa to 223.5 MPa. Injection rate from 135 g/s to 192 g/s.
Mold opening stroke: 450mm. Tie bar spacing: 470×470mm (width × height). Maximum daylight: 980mm. Mold height range: 180mm to 530mm.
Overall machine dimensions: 4.98×1.31×2.11 m (L×W×H). Machine weight: 5.6 t.
The NEO·T Series series includes 12 models with clamping forces from 900 kN to 10500 kN (90-1050 metric tons). A total of 36 injection unit configurations are available in this series.
非常适合 包装、家用电器和中型技术零件成型.
合模单元: T160
注射单元: i600
变体 (3)
| 参数 | 变体 A | 变体 B | 变体 C |
|---|---|---|---|
| 螺杆直径 | 42 mm | 45 mm | 50 mm |
| 长径比 | 21.4 | 20 | 18 |
| 射胶容量 | 312 cm³ | 358 cm³ | 442 cm³ |
| 射胶重量 (PS) | 284 g | 326 g | 402 g |
| 注射压力 | 224 MPa | 195 MPa | 158 MPa |
| 注射速率 | 135 g/s | 155 g/s | 192 g/s |
设备与选项
设备与选项
Similar Machines by Clamping Force
Other Tederic models with clamping force around 1600 kN from different series.
D160
1600 kN(160t)
Toggle Clamp
3 screw variants
NEO·EII SeriesE160II
1600 kN(160t)
All-Electric
18 screw variants
NEO T lite SeriesT160
1600 kN(160t)
Toggle Clamp
3 screw variants
DE-C SeriesDE168
1680 kN(168t)
All-Electric
9 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Complete Guide to Injection Molding Machines
Comprehensive overview of machine types, selection criteria, and key specifications.
Read moreProduction Cycle Optimization
Strategies to improve efficiency and reduce cycle times in injection molding.
Read moreInjection Molding Defects: Identification & Solutions
Common defects, their causes, and practical solutions for quality improvement.
Read more