NEO T lite Series T650 - 技术规格
NEO T lite Series T650 机器概述
Tederic NEO T lite Series T650 肘杆式 注塑机 锁模力为 6500 kN (650 metric tons). This is a mid-range capacity machine within the NEO T lite Series series.
This model offers 3 screw diameter options (85mm, 90mm, 100mm). Shot weight (PS) ranges from 2324g to 3216g. Injection pressure from 146.6 MPa to 202.9 MPa. Injection rate from 502 g/s to 695 g/s.
Mold opening stroke: 940mm. Tie bar spacing: 920×920mm (width × height). Maximum daylight: 1880mm. Mold height range: 400mm to 940mm.
Overall machine dimensions: 9.7×2.09×2.77 m (L×W×H). Machine weight: 26 t.
The NEO T lite Series series includes 16 models with clamping forces from 900 kN to 10000 kN (90-1000 metric tons). A total of 48 injection unit configurations are available in this series.
非常适合 包装、家用电器和中型技术零件成型.
合模单元: T650
注射单元: i5800
变体 (3)
| 参数 | 变体 A | 变体 B | 变体 C |
|---|---|---|---|
| 螺杆直径 | 85 mm | 90 mm | 100 mm |
| 长径比 | 23.3 | 22 | 19.8 |
| 射胶容量 | 2,554 cm³ | 2,863 cm³ | 3,534 cm³ |
| 射胶重量 (PS) | 2,324 g | 2,605 g | 3,216 g |
| 注射压力 | 203 MPa | 181 MPa | 147 MPa |
| 注射速率 | 502 g/s | 563 g/s | 695 g/s |
Similar Machines by Clamping Force
Other Tederic models with clamping force around 6500 kN from different series.
E670II
6700 kN(670t)
All-Electric
9 screw variants
DT SeriesD600
6000 kN(600t)
Toggle Clamp
3 screw variants
DT SeriesD700
7000 kN(700t)
Toggle Clamp
3 screw variants
NEO·T SeriesT600
6000 kN(600t)
Toggle Clamp
3 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Complete Guide to Injection Molding Machines
Comprehensive overview of machine types, selection criteria, and key specifications.
Read moreProduction Cycle Optimization
Strategies to improve efficiency and reduce cycle times in injection molding.
Read moreInjection Molding Defects: Identification & Solutions
Common defects, their causes, and practical solutions for quality improvement.
Read more