NEO T lite Series T260 - 技术规格
NEO T lite Series T260 机器概述
Tederic NEO T lite Series T260 肘杆式 注塑机 锁模力为 2600 kN (260 metric tons). This is a smaller capacity machine within the NEO T lite Series series.
This model offers 3 screw diameter options (55mm, 60mm, 65mm). Shot weight (PS) ranges from 597g to 833g. Injection pressure from 158.4 MPa to 221.3 MPa. Injection rate from 210 g/s to 293 g/s.
Mold opening stroke: 550mm. Tie bar spacing: 610×570mm (width × height). Maximum daylight: 1150mm. Mold height range: 220mm to 600mm.
Overall machine dimensions: 5.45×1.73×2.2 m (L×W×H). Machine weight: 8.4 t.
The NEO T lite Series series includes 16 models with clamping forces from 900 kN to 10000 kN (90-1000 metric tons). A total of 48 injection unit configurations are available in this series.
非常适合 包装、家用电器和中型技术零件成型.
合模单元: T260
注射单元: i1500
变体 (3)
| 参数 | 变体 A | 变体 B | 变体 C |
|---|---|---|---|
| 螺杆直径 | 55 mm | 60 mm | 65 mm |
| 长径比 | 21.8 | 20 | 18.5 |
| 射胶容量 | 656 cm³ | 780 cm³ | 916 cm³ |
| 射胶重量 (PS) | 597 g | 710 g | 833 g |
| 注射压力 | 221 MPa | 186 MPa | 158 MPa |
| 注射速率 | 210 g/s | 250 g/s | 293 g/s |
Similar Machines by Clamping Force
Other Tederic models with clamping force around 2600 kN from different series.
T260
2600 kN(260t)
Toggle Clamp
3 screw variants
NEO·EII SeriesE260II
2600 kN(260t)
All-Electric
18 screw variants
DE-C SeriesDE258
2580 kN(258t)
All-Electric
9 screw variants
DE SeriesDE265
2650 kN(265t)
All-Electric
1 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Complete Guide to Injection Molding Machines
Comprehensive overview of machine types, selection criteria, and key specifications.
Read moreProduction Cycle Optimization
Strategies to improve efficiency and reduce cycle times in injection molding.
Read moreInjection Molding Defects: Identification & Solutions
Common defects, their causes, and practical solutions for quality improvement.
Read more