NEO·EII Series E260II - 技术规格
NEO·EII Series E260II 机器概述
Tederic NEO·EII Series E260II 全电动伺服驱动 注塑机 锁模力为 2600 kN (260 metric tons). This is a smaller capacity machine within the NEO·EII Series series.
This model offers 18 screw diameter options (42mm, 42mm, 45mm, 45mm, 45mm, 45mm, 50mm, 50mm, 50mm, 50mm, 50mm, 50mm, 55mm, 55mm, 55mm, 55mm, 60mm, 60mm). Shot weight (PS) ranges from 246g to 618g. Injection pressure from 155 MPa to 247 MPa. Injection rate from 232 g/s to 772 g/s.
Mold opening stroke: 550mm. Tie bar spacing: 630×560mm (width × height). Maximum daylight: 1150mm. Mold height range: 250mm to 600mm.
Overall machine dimensions: 6.2×1.7×2.3 m (L×W×H). Machine weight: 10.7 t.
The NEO·EII Series series includes 14 models with clamping forces from 600 kN to 14000 kN (60-1400 metric tons). A total of 210 injection unit configurations are available in this series.
非常适合 需要最高洁净度的精密医疗、电子和光学组件成型.
合模单元: E260II
注射单元: e620/e620h/e840/e840h/e1100/e1100h (h = 高速)
变体 (18)
注射单元: e620
| 参数 | 变体 A | 变体 B | 变体 C |
|---|---|---|---|
| 螺杆直径 | 42 mm | 45 mm | 50 mm |
| 长径比 | 21.4 | 20 | 18 |
| 射胶容量 | 270 cm³ | 310 cm³ | 383 cm³ |
| 射胶重量 (PS) | 246 g | 282 g | 348 g |
| 注射压力 | 230 MPa | 200 MPa | 162 MPa |
| 保压压力 | 184 MPa | 160 MPa | 130 MPa |
| 注射速率 | 252 g/s | 289 g/s | 357 g/s |
注射单元: e620h (h = 高速)
| 参数 | 变体 A | 变体 B | 变体 C |
|---|---|---|---|
| 螺杆直径 | 42 mm | 45 mm | 50 mm |
| 长径比 | 21.4 | 20 | 18 |
| 射胶容量 | 270 cm³ | 310 cm³ | 383 cm³ |
| 射胶重量 (PS) | 246 g | 282 g | 348 g |
| 注射压力 | 230 MPa | 200 MPa | 162 MPa |
| 保压压力 | 184 MPa | 160 MPa | 130 MPa |
| 注射速率 | 504 g/s | 579 g/s | 715 g/s |
注射单元: e840
| 参数 | 变体 A | 变体 B | 变体 C |
|---|---|---|---|
| 螺杆直径 | 45 mm | 50 mm | 55 mm |
| 长径比 | 22.2 | 20 | 18.2 |
| 射胶容量 | 342 cm³ | 422 cm³ | 511 cm³ |
| 射胶重量 (PS) | 311 g | 384 g | 465 g |
| 注射压力 | 247 MPa | 200 MPa | 165 MPa |
| 保压压力 | 198 MPa | 160 MPa | 132 MPa |
| 注射速率 | 232 g/s | 286 g/s | 346 g/s |
注射单元: e840h (h = 高速)
| 参数 | 变体 A | 变体 B | 变体 C |
|---|---|---|---|
| 螺杆直径 | 45 mm | 50 mm | 55 mm |
| 长径比 | 22.2 | 20 | 18.2 |
| 射胶容量 | 342 cm³ | 422 cm³ | 511 cm³ |
| 射胶重量 (PS) | 311 g | 384 g | 465 g |
| 注射压力 | 247 MPa | 200 MPa | 165 MPa |
| 保压压力 | 198 MPa | 160 MPa | 132 MPa |
| 注射速率 | 434 g/s | 536 g/s | 649 g/s |
注射单元: e1100
| 参数 | 变体 A | 变体 B | 变体 C |
|---|---|---|---|
| 螺杆直径 | 50 mm | 55 mm | 60 mm |
| 长径比 | 22 | 20 | 18.3 |
| 射胶容量 | 471 cm³ | 570 cm³ | 679 cm³ |
| 射胶重量 (PS) | 429 g | 519 g | 618 g |
| 注射压力 | 224 MPa | 185 MPa | 155 MPa |
| 保压压力 | 179 MPa | 148 MPa | 124 MPa |
| 注射速率 | 286 g/s | 346 g/s | 412 g/s |
注射单元: e1100h (h = 高速)
| 参数 | 变体 A | 变体 B | 变体 C |
|---|---|---|---|
| 螺杆直径 | 50 mm | 55 mm | 60 mm |
| 长径比 | 22 | 20 | 18.3 |
| 射胶容量 | 471 cm³ | 570 cm³ | 679 cm³ |
| 射胶重量 (PS) | 429 g | 519 g | 618 g |
| 注射压力 | 224 MPa | 185 MPa | 155 MPa |
| 保压压力 | 179 MPa | 148 MPa | 124 MPa |
| 注射速率 | 536 g/s | 649 g/s | 772 g/s |
设备与选项
设备与选项
Similar Machines by Clamping Force
Other Tederic models with clamping force around 2600 kN from different series.
T260
2600 kN(260t)
Toggle Clamp
3 screw variants
NEO T lite SeriesT260
2600 kN(260t)
Toggle Clamp
3 screw variants
DE-C SeriesDE258
2580 kN(258t)
All-Electric
9 screw variants
DE SeriesDE265
2650 kN(265t)
All-Electric
1 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Micro-Injection Molding for Medical Components
Specialized techniques for producing precision medical microcomponents.
Read moreAutomation & Industry 4.0 in Injection Molding
Smart factory integration, automation systems, and digital transformation.
Read moreTCO & Energy Efficiency in Injection Molding
Total cost of ownership analysis and energy-saving strategies for modern machines.
Read more