DT Series D4000 - 技术规格
DT Series D4000 机器概述
Tederic DT Series D4000 肘杆式 注塑机 锁模力为 40000 kN (4000 metric tons). This is a larger capacity machine within the DT Series series.
This model offers 2 screw diameter options (250mm, 260mm). Shot weight (PS) ranges from 57132g to 61794g. Injection pressure from 159.1 MPa to 172.1 MPa. Injection rate from 2517 g/s to 2723 g/s.
Mold opening stroke: 2255mm. Tie bar spacing: 2400×2000mm (width × height). Maximum daylight: 4355mm. Mold height range: 1100mm to 2100mm.
Overall machine dimensions: 25.9×4.81×4.92 m (L×W×H). Machine weight: 306 t.
The DT Series series includes 19 models with clamping forces from 1000 kN to 40000 kN (100-4000 metric tons). A total of 59 injection unit configurations are available in this series.
非常适合 包装、家用电器和中型技术零件成型.
合模单元: D4000
注射单元: i108000
变体 (2)
| 参数 | 变体 A | 变体 B |
|---|---|---|
| 螺杆直径 | 250 mm | 260 mm |
| 长径比 | 22.9 | 22 |
| 射胶容量 | 62,783 cm³ | 67,906 cm³ |
| 射胶重量 (PS) | 57,132 g | 61,794 g |
| 注射压力 | 172 MPa | 159 MPa |
| 注射速率 | 2517 g/s | 2723 g/s |
Similar Machines by Clamping Force
Other Tederic models with clamping force around 40000 kN from different series.
H3500II
35000 kN(3500t)
Two-Platen
8 screw variants
NEO·HII SeriesH4500II
45000 kN(4500t)
Two-Platen
10 screw variants
J type SeriesH3500II/JI179000
35000 kN(3500t)
Hydraulic
1 screw variants
J type SeriesH4500II/JI280000
45000 kN(4500t)
Hydraulic
1 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Complete Guide to Injection Molding Machines
Comprehensive overview of machine types, selection criteria, and key specifications.
Read moreProduction Cycle Optimization
Strategies to improve efficiency and reduce cycle times in injection molding.
Read moreInjection Molding Defects: Identification & Solutions
Common defects, their causes, and practical solutions for quality improvement.
Read more