DT Series D400 - 技术规格
DT Series D400 机器概述
Tederic DT Series D400 肘杆式 注塑机 锁模力为 4000 kN (400 metric tons). This is a smaller capacity machine within the DT Series series.
This model offers 3 screw diameter options (65mm, 70mm, 75mm). Shot weight (PS) ranges from 1057g to 1407g. Injection pressure from 167 MPa to 222 MPa. Injection rate from 250 g/s to 333 g/s.
Mold opening stroke: 750mm. Tie bar spacing: 730×730mm (width × height). Maximum daylight: 1500mm. Mold height range: 280mm to 750mm.
Overall machine dimensions: 7.88×1.98×2.55 m (L×W×H). Machine weight: 15.5 t.
The DT Series series includes 19 models with clamping forces from 1000 kN to 40000 kN (100-4000 metric tons). A total of 59 injection unit configurations are available in this series.
非常适合 包装、家用电器和中型技术零件成型.
合模单元: D400
注射单元: i2500
标准 / 高功率
变体 (3)
| 参数 | 变体 A | 变体 B | 变体 C |
|---|---|---|---|
| 螺杆直径 | 65 mm | 70 mm | 75 mm |
| 长径比 | 23.7 | 22 | 20.5 |
| 射胶容量 | 1,161 cm³ | 1,347 cm³ | 1,546 cm³ |
| 射胶重量 (PS) | 1,057 g | 1,226 g | 1,407 g |
| 注射压力 | 222 MPa | 191 MPa | 167 MPa |
| 注射速率(标准 / 高功率) | 250 / 296 g/s | 290 / 343 g/s | 333 / 394 g/s |
Similar Machines by Clamping Force
Other Tederic models with clamping force around 4000 kN from different series.
T400
4000 kN(400t)
Toggle Clamp
3 screw variants
NEO T lite SeriesT400
4000 kN(400t)
Toggle Clamp
3 screw variants
J type SeriesDT400/JI8200
4000 kN(400t)
Hydraulic
1 screw variants
J type SeriesDT400/JI8200
4000 kN(400t)
Hydraulic
1 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Complete Guide to Injection Molding Machines
Comprehensive overview of machine types, selection criteria, and key specifications.
Read moreProduction Cycle Optimization
Strategies to improve efficiency and reduce cycle times in injection molding.
Read moreInjection Molding Defects: Identification & Solutions
Common defects, their causes, and practical solutions for quality improvement.
Read more