DT Series D250 - 技术规格
DT Series D250 机器概述
Tederic DT Series D250 肘杆式 注塑机 锁模力为 2500 kN (250 metric tons). This is a smaller capacity machine within the DT Series series.
This model offers 3 screw diameter options (50mm, 55mm, 60mm). Shot weight (PS) ranges from 452g to 651g. Injection pressure from 156 MPa to 224 MPa. Injection rate from 169 g/s to 243 g/s.
Mold opening stroke: 550mm. Tie bar spacing: 580×580mm (width × height). Maximum daylight: 1150mm. Mold height range: 250mm to 600mm.
Overall machine dimensions: 5.9×1.67×2.18 m (L×W×H). Machine weight: 8.2 t.
The DT Series series includes 19 models with clamping forces from 1000 kN to 40000 kN (100-4000 metric tons). A total of 59 injection unit configurations are available in this series.
非常适合 包装、家用电器和中型技术零件成型.
合模单元: D250
注射单元: i1100
标准 / 高功率
变体 (3)
| 参数 | 变体 A | 变体 B | 变体 C |
|---|---|---|---|
| 螺杆直径 | 50 mm | 55 mm | 60 mm |
| 长径比 | 22 | 20 | 18.3 |
| 射胶容量 | 497 cm³ | 601 cm³ | 715 cm³ |
| 射胶重量 (PS) | 452 g | 547 g | 651 g |
| 注射压力 | 224 MPa | 185 MPa | 156 MPa |
| 注射速率(标准 / 高功率) | 169 / 207 g/s | 204 / 251 g/s | 243 / 298 g/s |
Similar Machines by Clamping Force
Other Tederic models with clamping force around 2500 kN from different series.
DE258
2580 kN(258t)
All-Electric
9 screw variants
NEO·T SeriesT260
2600 kN(260t)
Toggle Clamp
3 screw variants
NEO·EII SeriesE260II
2600 kN(260t)
All-Electric
18 screw variants
NEO T lite SeriesT260
2600 kN(260t)
Toggle Clamp
3 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Complete Guide to Injection Molding Machines
Comprehensive overview of machine types, selection criteria, and key specifications.
Read moreProduction Cycle Optimization
Strategies to improve efficiency and reduce cycle times in injection molding.
Read moreInjection Molding Defects: Identification & Solutions
Common defects, their causes, and practical solutions for quality improvement.
Read more