DT Series D1500 - 技术规格
DT Series D1500 机器概述
Tederic DT Series D1500 肘杆式 注塑机 锁模力为 15000 kN (1500 metric tons). This is a mid-range capacity machine within the DT Series series.
This model offers 3 screw diameter options (110mm, 120mm, 130mm). Shot weight (PS) ranges from 4834g to 6752g. Injection pressure from 137.3 MPa to 191.8 MPa. Injection rate from 868 g/s to 1212 g/s.
Mold opening stroke: 1520mm. Tie bar spacing: 1460×1360mm (width × height). Maximum daylight: 2920mm. Mold height range: 650mm to 1400mm.
Overall machine dimensions: 14.2×3.5×4 m (L×W×H). Machine weight: 69 t.
The DT Series series includes 19 models with clamping forces from 1000 kN to 40000 kN (100-4000 metric tons). A total of 59 injection unit configurations are available in this series.
非常适合 包装、家用电器和中型技术零件成型.
合模单元: D1500
注射单元: i10600
变体 (3)
| 参数 | 变体 A | 变体 B | 变体 C |
|---|---|---|---|
| 螺杆直径 | 110 mm | 120 mm | 130 mm |
| 长径比 | 24 | 22 | 20.3 |
| 射胶容量 | 5,312 cm³ | 6,322 cm³ | 7,420 cm³ |
| 射胶重量 (PS) | 4,834 g | 5,753 g | 6,752 g |
| 注射压力 | 192 MPa | 161 MPa | 137 MPa |
| 注射速率 | 868 g/s | 1032 g/s | 1212 g/s |
Similar Machines by Clamping Force
Other Tederic models with clamping force around 15000 kN from different series.
DT1500/JI54000
15000 kN(1500t)
Hydraulic
1 screw variants
J type SeriesDT1500/JI54000
15000 kN(1500t)
Hydraulic
1 screw variants
NEO·M SeriesM1420v
14200 kN(1420t)
Multi-Component
4 screw variants
NEO·HII SeriesH1400II
14000 kN(1400t)
Two-Platen
3 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Complete Guide to Injection Molding Machines
Comprehensive overview of machine types, selection criteria, and key specifications.
Read moreProduction Cycle Optimization
Strategies to improve efficiency and reduce cycle times in injection molding.
Read moreInjection Molding Defects: Identification & Solutions
Common defects, their causes, and practical solutions for quality improvement.
Read more