DT Series D100 - 技术规格
DT Series D100 机器概述
Tederic DT Series D100 肘杆式 注塑机 锁模力为 1000 kN (100 metric tons). This is a smaller capacity machine within the DT Series series.
This model offers 3 screw diameter options (35mm, 38mm, 42mm). Shot weight (PS) ranges from 153g to 221g. Injection pressure from 158 MPa to 228 MPa. Injection rate from 86 g/s to 124 g/s.
Mold opening stroke: 360mm. Tie bar spacing: 360×360mm (width × height). Maximum daylight: 740mm. Mold height range: 150mm to 380mm.
Overall machine dimensions: 4.27×1.3×1.84 m (L×W×H). Machine weight: 3.2 t.
The DT Series series includes 19 models with clamping forces from 1000 kN to 40000 kN (100-4000 metric tons). A total of 59 injection unit configurations are available in this series.
非常适合 包装、家用电器和中型技术零件成型.
合模单元: D100
注射单元: i380
标准 / 高功率
变体 (3)
| 参数 | 变体 A | 变体 B | 变体 C |
|---|---|---|---|
| 螺杆直径 | 35 mm | 38 mm | 42 mm |
| 长径比 | 21.7 | 20 | 18.1 |
| 射胶容量 | 168 cm³ | 199 cm³ | 243 cm³ |
| 射胶重量 (PS) | 153 g | 181 g | 221 g |
| 注射压力 | 228 MPa | 193 MPa | 158 MPa |
| 注射速率(标准 / 高功率) | 86 / 106 g/s | 102 / 125 g/s | 124 / 153 g/s |
Similar Machines by Clamping Force
Other Tederic models with clamping force around 1000 kN from different series.
T90
900 kN(90t)
Toggle Clamp
3 screw variants
NEO·EII SeriesE90II
900 kN(90t)
All-Electric
18 screw variants
NEO T lite SeriesT90
900 kN(90t)
Toggle Clamp
3 screw variants
DE SeriesDE110
1100 kN(110t)
All-Electric
6 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Complete Guide to Injection Molding Machines
Comprehensive overview of machine types, selection criteria, and key specifications.
Read moreProduction Cycle Optimization
Strategies to improve efficiency and reduce cycle times in injection molding.
Read moreInjection Molding Defects: Identification & Solutions
Common defects, their causes, and practical solutions for quality improvement.
Read more