NEO T lite Series T90 - Technical Specifications
NEO T lite Series T90 Machine Overview
Tederic NEO T lite Series T90 toggle clamp injection molding machine with a clamping force of 900 kN (90 metric tons). This is a smaller capacity machine within the NEO T lite Series series.
This model offers 3 screw diameter options (35mm, 38mm, 42mm). Shot weight (PS) ranges from 153g to 221g. Injection pressure from 158.2 MPa to 227.9 MPa. Injection rate from 86 g/s to 124 g/s.
Mold opening stroke: 340mm. Tie bar spacing: 360×360mm (width × height). Maximum daylight: 730mm. Mold height range: 150mm to 390mm.
Overall machine dimensions: 4.34×1.3×2 m (L×W×H). Machine weight: 3.3 t.
The NEO T lite Series series includes 16 models with clamping forces from 900 kN to 10000 kN (90-1000 metric tons). A total of 48 injection unit configurations are available in this series.
Ideal for packaging, household appliances, and medium-sized technical parts molding.
Clamping Unit: T90
Injection Unit: i380
Variants (3)
| Parameter | Variant A | Variant B | Variant C |
|---|---|---|---|
| Screw Diameter | 35 mm | 38 mm | 42 mm |
| L/D Ratio | 21.7 | 20 | 18.1 |
| Shot Volume | 168 cm³ | 198 cm³ | 242 cm³ |
| Shot Weight (PS) | 153 g | 181 g | 221 g |
| Injection Pressure | 228 MPa | 193 MPa | 158 MPa |
| Injection Rate | 86 g/s | 102 g/s | 124 g/s |
Similar Machines by Clamping Force
Other Tederic models with clamping force around 900 kN from different series.
T90
900 kN(90t)
Toggle Clamp
3 screw variants
NEO·EII SeriesE90II
900 kN(90t)
All-Electric
18 screw variants
DE SeriesDE85
850 kN(85t)
All-Electric
6 screw variants
DT SeriesD100
1000 kN(100t)
Toggle Clamp
3 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Complete Guide to Injection Molding Machines
Comprehensive overview of machine types, selection criteria, and key specifications.
Read moreProduction Cycle Optimization
Strategies to improve efficiency and reduce cycle times in injection molding.
Read moreInjection Molding Defects: Identification & Solutions
Common defects, their causes, and practical solutions for quality improvement.
Read more