NEO T lite Series T450 - 技术规格
NEO T lite Series T450 机器概述
Tederic NEO T lite Series T450 肘杆式 注塑机 锁模力为 4500 kN (450 metric tons). This is a mid-range capacity machine within the NEO T lite Series series.
This model offers 3 screw diameter options (70mm, 75mm, 80mm). Shot weight (PS) ranges from 1380g to 1802g. Injection pressure from 153.1 MPa to 200 MPa. Injection rate from 328 g/s to 428 g/s.
Mold opening stroke: 800mm. Tie bar spacing: 780×780mm (width × height). Maximum daylight: 1580mm. Mold height range: 300mm to 780mm.
Overall machine dimensions: 7.8×2.15×2.56 m (L×W×H). Machine weight: 17.8 t.
The NEO T lite Series series includes 16 models with clamping forces from 900 kN to 10000 kN (90-1000 metric tons). A total of 48 injection unit configurations are available in this series.
非常适合 包装、家用电器和中型技术零件成型.
合模单元: T450
注射单元: i3200
变体 (3)
| 参数 | 变体 A | 变体 B | 变体 C |
|---|---|---|---|
| 螺杆直径 | 70 mm | 75 mm | 80 mm |
| 长径比 | 23.6 | 22 | 20.6 |
| 射胶容量 | 1,516 cm³ | 1,741 cm³ | 1,980 cm³ |
| 射胶重量 (PS) | 1,380 g | 1,584 g | 1,802 g |
| 注射压力 | 200 MPa | 174 MPa | 153 MPa |
| 注射速率 | 328 g/s | 376 g/s | 428 g/s |
Similar Machines by Clamping Force
Other Tederic models with clamping force around 4500 kN from different series.
DE460
4600 kN(460t)
All-Electric
6 screw variants
NEO·EII SeriesE470II
4700 kN(470t)
All-Electric
18 screw variants
DE-C SeriesDE478
4780 kN(478t)
All-Electric
9 screw variants
DE SeriesDE415
4150 kN(415t)
All-Electric
2 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Complete Guide to Injection Molding Machines
Comprehensive overview of machine types, selection criteria, and key specifications.
Read moreProduction Cycle Optimization
Strategies to improve efficiency and reduce cycle times in injection molding.
Read moreInjection Molding Defects: Identification & Solutions
Common defects, their causes, and practical solutions for quality improvement.
Read more