J type Series DT500/JI15000 - 技术规格
J type Series DT500/JI15000 机器概述
Tederic J type Series DT500/JI15000 液压式 注塑机 锁模力为 5000 kN (500 metric tons). This is a smaller capacity machine within the J type Series series.
This model offers 1 screw diameter options (90mm). Shot weight (PS) ranges from 12470g to 12470g. Injection pressure from 90.3 MPa to 90.3 MPa. Injection rate from 656 g/s to 656 g/s.
Mold opening stroke: 840mm. Tie bar spacing: 820×820mm (width × height). Maximum daylight: 1640mm. Mold height range: 320mm to 800mm.
Overall machine dimensions: 9.2×3.2×3.9 m (L×W×H).
The J type Series series includes 24 models with clamping forces from 4000 kN to 45000 kN (400-4500 metric tons). A total of 24 injection unit configurations are available in this series.
非常适合 需要高锁模力的重型工业组件和零件成型.
合模单元: DT500/JI15000
注射单元: JI15000
变体 (1)
| 参数 | 变体 A |
|---|---|
| 螺杆直径 | 90 mm |
| 柱塞直径 | 160 mm |
| 长径比 | 30 |
| 射胶容量 | 17,082 cm³ |
| 射胶重量 (PS) | 12,470 g |
| 注射压力 | 90 MPa |
| 注射速率 | 656 g/s |
Similar Machines by Clamping Force
Other Tederic models with clamping force around 5000 kN from different series.
D500
5000 kN(500t)
Toggle Clamp
3 screw variants
NEO·T SeriesT500
5000 kN(500t)
Toggle Clamp
3 screw variants
NEO T lite SeriesT500
5000 kN(500t)
Toggle Clamp
3 screw variants
DE-C SeriesDE478
4780 kN(478t)
All-Electric
9 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Complete Guide to Injection Molding Machines
Comprehensive overview of machine types, selection criteria, and key specifications.
Read moreTCO & Energy Efficiency in Injection Molding
Total cost of ownership analysis and energy-saving strategies for modern machines.
Read morePredictive Maintenance for Injection Machines
Modern maintenance strategies to maximize uptime and machine longevity.
Read more