NEO T lite Series T800 - Műszaki adatok
NEO T lite Series T800 fröccsöntő gép áttekintése
Tederic NEO T lite Series T800 térdkaros fröccsöntő gép záróerővel 8000 kN (800 metric tons). This is a larger capacity machine within the NEO T lite Series series.
This model offers 3 screw diameter options (90mm, 100mm, 110mm). Shot weight (PS) ranges from 2779g to 4151g. Injection pressure from 148.9 MPa to 222.4 MPa. Injection rate from 572 g/s to 854 g/s.
Mold opening stroke: 1050mm. Tie bar spacing: 1020×1020mm (width × height). Maximum daylight: 2050mm. Mold height range: 400mm to 1000mm.
Overall machine dimensions: 10.4×2.2×2.8 m (L×W×H). Machine weight: 35 t.
The NEO T lite Series series includes 16 models with clamping forces from 900 kN to 10000 kN (90-1000 metric tons). A total of 48 injection unit configurations are available in this series.
Ideális csomagolás, háztartási készülékek és közepes méretű műszaki alkatrészek öntése.
Záróegység: T800
Fröccsöntő egység: i7500
Változatok (3)
| Paraméter | Változat A | Változat B | Változat C |
|---|---|---|---|
| Csigaátmérő | 90 mm | 100 mm | 110 mm |
| L/D arány | 24.4 | 22 | 20 |
| Lövéstérfogat | 3,054 cm³ | 3,770 cm³ | 4,562 cm³ |
| Lövéstömeg (PS) | 2,779 g | 3,431 g | 4,151 g |
| Fröccsöntési nyomás | 222 MPa | 180 MPa | 149 MPa |
| Fröccsöntési sebesség | 572 g/s | 706 g/s | 854 g/s |
Similar Machines by Clamping Force
Other Tederic models with clamping force around 8000 kN from different series.
D800
8000 kN(800t)
Toggle Clamp
3 screw variants
NEO·T SeriesT800
8000 kN(800t)
Toggle Clamp
3 screw variants
DE SeriesDE800
8000 kN(800t)
All-Electric
1 screw variants
J type SeriesDT800/JI24000
8000 kN(800t)
Hydraulic
1 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Complete Guide to Injection Molding Machines
Comprehensive overview of machine types, selection criteria, and key specifications.
Read moreProduction Cycle Optimization
Strategies to improve efficiency and reduce cycle times in injection molding.
Read moreInjection Molding Defects: Identification & Solutions
Common defects, their causes, and practical solutions for quality improvement.
Read more