DT Series D600 - Műszaki adatok
DT Series D600 fröccsöntő gép áttekintése
Tederic DT Series D600 térdkaros fröccsöntő gép záróerővel 6000 kN (600 metric tons). This is a smaller capacity machine within the DT Series series.
This model offers 3 screw diameter options (80mm, 85mm, 90mm). Shot weight (PS) ranges from 2040g to 2582g. Injection pressure from 174.1 MPa to 220.4 MPa. Injection rate from 382 g/s to 484 g/s.
Mold opening stroke: 900mm. Tie bar spacing: 880×880mm (width × height). Maximum daylight: 1800mm. Mold height range: 400mm to 900mm.
Overall machine dimensions: 9.61×2.02×2.77 m (L×W×H). Machine weight: 23.3 t.
The DT Series series includes 19 models with clamping forces from 1000 kN to 40000 kN (100-4000 metric tons). A total of 59 injection unit configurations are available in this series.
Ideális csomagolás, háztartási készülékek és közepes méretű műszaki alkatrészek öntése.
Záróegység: D600
Fröccsöntő egység: i4800
Standard / Nagy teljesítmény
Változatok (3)
| Paraméter | Változat A | Változat B | Változat C |
|---|---|---|---|
| Csigaátmérő | 80 mm | 85 mm | 90 mm |
| L/D arány | 23.4 | 22 | 20.8 |
| Lövéstérfogat | 2,242 cm³ | 2,531 cm³ | 2,837 cm³ |
| Lövéstömeg (PS) | 2,040 g | 2,303 g | 2,582 g |
| Fröccsöntési nyomás | 220 MPa | 195 MPa | 174 MPa |
| Fröccsöntési sebesség(Standard / Nagy teljesítmény) | 382 / 462 g/s | 431 / 522 g/s | 484 / 585 g/s |
Similar Machines by Clamping Force
Other Tederic models with clamping force around 6000 kN from different series.
T600
6000 kN(600t)
Toggle Clamp
3 screw variants
NEO T lite SeriesT600
6000 kN(600t)
Toggle Clamp
3 screw variants
J type SeriesDT600/JI24000
6000 kN(600t)
Hydraulic
1 screw variants
J type SeriesDT600/JI24000
6000 kN(600t)
Hydraulic
1 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Complete Guide to Injection Molding Machines
Comprehensive overview of machine types, selection criteria, and key specifications.
Read moreProduction Cycle Optimization
Strategies to improve efficiency and reduce cycle times in injection molding.
Read moreInjection Molding Defects: Identification & Solutions
Common defects, their causes, and practical solutions for quality improvement.
Read more