NEO T lite Series T200 - Technical Specifications
NEO T lite Series T200 Machine Overview
Tederic NEO T lite Series T200 toggle clamp injection molding machine with a clamping force of 2000 kN (200 metric tons). This is a smaller capacity machine within the NEO T lite Series series.
This model offers 3 screw diameter options (50mm, 55mm, 60mm). Shot weight (PS) ranges from 475g to 684g. Injection pressure from 149.5 MPa to 215.3 MPa. Injection rate from 176 g/s to 253 g/s.
Mold opening stroke: 510mm. Tie bar spacing: 530×530mm (width × height). Maximum daylight: 1070mm. Mold height range: 200mm to 560mm.
Overall machine dimensions: 5.26×1.68×2.17 m (L×W×H). Machine weight: 7.2 t.
The NEO T lite Series series includes 16 models with clamping forces from 900 kN to 10000 kN (90-1000 metric tons). A total of 48 injection unit configurations are available in this series.
Ideal for packaging, household appliances, and medium-sized technical parts molding.
Clamping Unit: T200
Injection Unit: i1100
Variants (3)
| Parameter | Variant A | Variant B | Variant C |
|---|---|---|---|
| Screw Diameter | 50 mm | 55 mm | 60 mm |
| L/D Ratio | 22 | 20 | 18.3 |
| Shot Volume | 522 cm³ | 632 cm³ | 752 cm³ |
| Shot Weight (PS) | 475 g | 575 g | 684 g |
| Injection Pressure | 215 MPa | 178 MPa | 150 MPa |
| Injection Rate | 176 g/s | 213 g/s | 253 g/s |
Similar Machines by Clamping Force
Other Tederic models with clamping force around 2000 kN from different series.
D200
2000 kN(200t)
Toggle Clamp
3 screw variants
NEO·T SeriesT200
2000 kN(200t)
Toggle Clamp
3 screw variants
NEO·EII SeriesE200II
2000 kN(200t)
All-Electric
18 screw variants
DE-C SeriesDE208
2080 kN(208t)
All-Electric
9 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Complete Guide to Injection Molding Machines
Comprehensive overview of machine types, selection criteria, and key specifications.
Read moreProduction Cycle Optimization
Strategies to improve efficiency and reduce cycle times in injection molding.
Read moreInjection Molding Defects: Identification & Solutions
Common defects, their causes, and practical solutions for quality improvement.
Read more