NEO T lite Series T130 - Technical Specifications
NEO T lite Series T130 Machine Overview
Tederic NEO T lite Series T130 toggle clamp injection molding machine with a clamping force of 1300 kN (130 metric tons). This is a smaller capacity machine within the NEO T lite Series series.
This model offers 3 screw diameter options (38mm, 42mm, 45mm). Shot weight (PS) ranges from 201g to 282g. Injection pressure from 165.9 MPa to 232.7 MPa. Injection rate from 104 g/s to 146 g/s.
Mold opening stroke: 360mm. Tie bar spacing: 410×410mm (width × height). Maximum daylight: 810mm. Mold height range: 150mm to 450mm.
Overall machine dimensions: 4.66×1.45×2.07 m (L×W×H). Machine weight: 4.4 t.
The NEO T lite Series series includes 16 models with clamping forces from 900 kN to 10000 kN (90-1000 metric tons). A total of 48 injection unit configurations are available in this series.
Ideal for packaging, household appliances, and medium-sized technical parts molding.
Clamping Unit: T130
Injection Unit: i510
Variants (3)
| Parameter | Variant A | Variant B | Variant C |
|---|---|---|---|
| Screw Diameter | 38 mm | 42 mm | 45 mm |
| L/D Ratio | 22.1 | 20 | 18.7 |
| Shot Volume | 221 cm³ | 270 cm³ | 310 cm³ |
| Shot Weight (PS) | 201 g | 246 g | 282 g |
| Injection Pressure | 233 MPa | 191 MPa | 166 MPa |
| Injection Rate | 104 g/s | 127 g/s | 146 g/s |
Similar Machines by Clamping Force
Other Tederic models with clamping force around 1300 kN from different series.
D130
1300 kN(130t)
Toggle Clamp
3 screw variants
NEO·T SeriesT130
1300 kN(130t)
Toggle Clamp
3 screw variants
NEO·EII SeriesE120II
1200 kN(120t)
All-Electric
18 screw variants
DE SeriesDE140
1400 kN(140t)
All-Electric
6 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Complete Guide to Injection Molding Machines
Comprehensive overview of machine types, selection criteria, and key specifications.
Read moreProduction Cycle Optimization
Strategies to improve efficiency and reduce cycle times in injection molding.
Read moreInjection Molding Defects: Identification & Solutions
Common defects, their causes, and practical solutions for quality improvement.
Read more