What screw diameter options are available for the Tederic NEO·M M2720s?

The Tederic M2720s offers 0 screw diameter options: N/A. Each diameter provides different shot volumes and weights, allowing you to match the machine to specific production requirements.

What is the maximum shot weight of the M2720s?

Contact us for shot weight information for the M2720s.

What is the injection pressure of the M2720s?

The M2720s injection pressure ranges from 0 MPa to 0 MPa, depending on the selected screw diameter. Smaller screw diameters provide higher injection pressure.

What are the dimensions and weight of the M2720s?

The overall dimensions of the M2720s are 23.4×5.1×4.2 m, with a machine weight of 149 t. The clamping force is 27200 kN.

What is the tie bar spacing of the M2720s?

The tie bar spacing of the M2720s is 2000×1700 mm (width × height), which determines the maximum mold dimensions that can be mounted on the machine.

NEO·M SeriesMulti-ComponentView Machine Details

M2720s

Multi-Component Injection Molding Machine

27,200

Variants

149

Back to Models

Clamping Unit: M2720s

Clamping Force

27,200 kN

Mold Opening Stroke

4,220 mm

Max Mold Height

1,800 mm

Min Mold Height

1,000 mm

Tie Bar Spacing

2000 × 1700 mm

Platen Dimensions (W×H)

2700 × 2480 mm

Min. Mold Dimensions

1400 × 1190 mm

Max Daylight

6,500 mm

Middle Platen Dimensions (W×H)

2700 × 1900 mm

Middle Plate Thickness

280 mm

Max Daylight (Middle Platen)

3,110 mm

Rotation Table Weight

50.0 t

Machine Weight

149.0 t

Overall Dimensions (L×W×H)

23.4 × 5.1 × 4.2 m

Multi-Component Injection Units

Type 12 injection units

Parameter	injection unit 1 i15800	injection unit 2 i9500
Screw Diameter	120 mm	90 mm
Shot Volume	7,223 cm³	3,497 cm³
Shot Weight (PS)	6,573 g	3,182 g
Injection Pressure	224 MPa	263 MPa
Injection Rate	1,083 g/s	614 g/s
Max Injection Speed	105 mm/s	106 mm/s
Injection Stroke	639 mm	550 mm
Screw Speed	90 rpm	112 rpm
Heater Power	104 kW	55 kW
Hopper Capacity	200 kg	100 kg
Oil Tank Volume	2,200 L	2,200 L

Variants (1)

Type 1

Parameter	Variant A	Variant B
ID	i15800	i9500
Screw Diameter	120 mm	90 mm
Shot Volume	7,223 cm³	3,497 cm³
Shot Weight (PS)	6,573 g	3,182 g
Injection Pressure	224 MPa	263 MPa
Injection Rate	1,083 g/s	614 g/s

Equipment & Options

Standard

Optional

—Not Available

Platen with T slots

Platen with tapped holes

Platen (according to EUROMAP 2)

High rigidity 5 points-double toggle structure

Mechanical safety

Electrical safety

Hydraulic safety

Auto-mold height adjustment function

Mold open, closing and mold adjusting controlled by transducer

Fix-quantity type auto central lubrication system

Mechanical adjust support for moving platen

High rigidity steel wear strips for moving platen

Auto safety door

EUROMAP 18 robot interface

Widened door and covers

Safety pressure plate under mold area

Two water regulation manifolds

Quick coupling for water regulator

Two air blow circuits

Four air blow circuits

Glass water flow regulators

Low pressure mold protection

Standard screw

Specialized screw and barrel

Shut off nozzle

Double cylinder injection

Double carriage cylinder injection unit

Carriage transducer

Screw rotation speed display

Hydraulic plasticizing

Electrical plasticizing

Proportional back pressure control

Closed-loop control of the temperature at the discharge port

Barrel insulation cover

Nozzle cover

Self-lock valve for carriage

Material loading platform

Manual central lubricating device for carriage

Carriage central auto lubrication device

Ceramic heating band

Screw mobile feed hopper

Gas-assisted injection interface

Hopper dryer

Stainless hopper

Barrel insulation device

Equipment & Options

Standard

Optional

—Not Available

Clamping Unit(22)

Platen with T slots

Platen with tapped holes

Platen (according to EUROMAP 2)

High rigidity 5 points-double toggle structure

Mechanical safety

Electrical safety

Hydraulic safety

Auto-mold height adjustment function

Mold open, closing and mold adjusting controlled by transducer

Fix-quantity type auto central lubrication system

Mechanical adjust support for moving platen

High rigidity steel wear strips for moving platen

Auto safety door

EUROMAP 18 robot interface

Widened door and covers

Safety pressure plate under mold area

Two water regulation manifolds

Quick coupling for water regulator

Two air blow circuits

Four air blow circuits

Glass water flow regulators

Low pressure mold protection

Injection Unit(23)

Standard screw

Specialized screw and barrel

Shut off nozzle

Double cylinder injection

Double carriage cylinder injection unit

Carriage transducer

Screw rotation speed display

Hydraulic plasticizing

Electrical plasticizing

Proportional back pressure control

Closed-loop control of the temperature at the discharge port

Barrel insulation cover

Nozzle cover

Self-lock valve for carriage

Material loading platform

Manual central lubricating device for carriage

Carriage central auto lubrication device

Ceramic heating band

Screw mobile feed hopper

Gas-assisted injection interface

Hopper dryer

Stainless hopper

Barrel insulation device

Electrical System(31)

KEBA controller

KEBA 15-inch touch screen

Memory with 200 sets of mold parameters

All action instant monitoring

Production monitoring

Failure alarm display

Changeover from injection fill to hold by injection pressure

I/O monitoring display

3 color light (with buzzer)

Motor overload protection

Front/back door emergency stop switch

5 pins socket of 380V/32A, 2 groups

5 pins socket of 380V/16A, 1 group

3 pins socket of 230V/16A, 1 group

Transformer for servomotor system

EUROMAP 13 neutron connection

EUROMAP 12 robot interface

EUROMAP 67 robot interface

Double protection for heating

Safety relay monitoring

SSR heating control

Hot runner control system & interface

Instant power consumption monitoring

Instant clamping force monitoring

230V/10A Industrial plug

Electrical cabinet lighting device

Remote control

Close-loop control for mold open/close

Safety pedal monitoring

Open-phase protection

Inspection of repair door

Hydraulic System(26)

Fast response servo system

Increased motor-pump unit

Independent cooling system

Independent filtration system

Pressure control for injection to hold on pressure

Programmable injection sequence

Fast injection with accumulator

Carriage self-lock valve

Proportional injection valve

Injection servo valve

Oil temp. detector

Oil level alarm

Anti-explosive chain

Self-lock suction oil filter

Control of oil temperature and cold water valve

Two core pull circuits on moving platen

Two core pull circuit on moving platen, two core pull circuit on fixed

Sequence valve

Fast molding closing device

Quick clamping device

Ejector on-the-fly

Hydraulic safety device

Plasticize on-the-fly

Plasticizing & ejector on the fly

Proportional valve control for clamp open and close

Servo valve control for clamp open and close

Other Equipment(14)

Standard tederic color

Shock-proof pad

Foundation steel plate, Foundation anchor bolts

Spare parts, regular tools, mold clamper, extended nozzle, operation manual

High base

Robot

Magnet (for hopper dryer)

Chiller

Mould temp controller

Dehumidifier

Autoloader

Fumigated wooden packaging

With full-tank hydraulic oil

Products fetching platform

Similar Machines by Clamping Force

Other Tederic models with clamping force around 27200 kN from different series.

J type Series

H2700/JI130000

27000 kN(2700t)

Hydraulic

1 screw variants

DT Series

D2800

28000 kN(2800t)

Toggle Clamp

4 screw variants

NEO·HII Series

H2850II

28500 kN(2850t)

Two-Platen

12 screw variants

NEO·HII Series

H2850II wp

28500 kN(2850t)

Two-Platen

12 screw variants

Compare machines from different series to find the best fit for your needs.

Learn more about injection molding technology and best practices.

NEO·M Series M2720s - Technical Specifications

M2720s

Clamping Unit: M2720s

Multi-Component Injection Units

Variants (1)

Type 1

Equipment & Options

Equipment & Options

Similar Machines by Clamping Force

H2700/JI130000

D2800

H2850II

H2850II wp

Related Articles

Insert Molding & In-Mold Electronics

Complete Guide to Injection Molding Machines

Injection Molding Defects: Identification & Solutions

M2720s

NEO·M Series M2720s Machine Overview

Clamping Unit: M2720s

Multi-Component Injection Units

Variants (1)

Type 1

Equipment & Options

Clamping Unit(22)

Injection Unit(23)

Electrical System(31)

Hydraulic System(26)

Other Equipment(14)

Equipment & Options

Similar Machines by Clamping Force

H2700/JI130000

D2800

H2850II

H2850II wp

Related Articles

Insert Molding & In-Mold Electronics

Complete Guide to Injection Molding Machines

Injection Molding Defects: Identification & Solutions