What screw diameter options are available for the Tederic NEO·M M1920s?

The Tederic M1920s offers 0 screw diameter options: N/A. Each diameter provides different shot volumes and weights, allowing you to match the machine to specific production requirements.

What is the maximum shot weight of the M1920s?

Contact us for shot weight information for the M1920s.

What is the injection pressure of the M1920s?

The M1920s injection pressure ranges from 0 MPa to 0 MPa, depending on the selected screw diameter. Smaller screw diameters provide higher injection pressure.

What are the dimensions and weight of the M1920s?

The overall dimensions of the M1920s are 18.1×4.5×3.9 m, with a machine weight of 110 t. The clamping force is 19200 kN.

What is the tie bar spacing of the M1920s?

The tie bar spacing of the M1920s is 1850×1500 mm (width × height), which determines the maximum mold dimensions that can be mounted on the machine.

NEO·M SeriesMulti-ComponentView Machine Details

M1920s

Multi-Component Injection Molding Machine

19,200

Variants

110

Back to Models

Clamping Unit: M1920s

Clamping Force

19,200 kN

Mold Opening Stroke

4,140 mm

Max Mold Height

1,550 mm

Min Mold Height

650 mm

Tie Bar Spacing

1850 × 1500 mm

Platen Dimensions (W×H)

2510 × 2110 mm

Min. Mold Dimensions

1295 × 1050 mm

Max Daylight

5,700 mm

Middle Platen Dimensions (W×H)

2450 × 1700 mm

Middle Plate Thickness

260 mm

Max Daylight (Middle Platen)

2,720 mm

Rotation Table Weight

30.0 t

Machine Weight

110.0 t

Overall Dimensions (L×W×H)

18.1 × 4.5 × 3.9 m

Multi-Component Injection Units

Type 12 injection units

Parameter	injection unit 1 i7500	injection unit 2 i5800
Screw Diameter	85 mm	80 mm
Shot Volume	2,921 cm³	2,376 cm³
Shot Weight (PS)	2,658 g	2,162 g
Injection Pressure	249 MPa	229 MPa
Injection Rate	789 g/s	705 g/s
Max Injection Speed	153 mm/s	154 mm/s
Injection Stroke	515 mm	473 mm
Screw Speed	120 rpm	120 rpm
Heater Power	69 kW	55 kW
Hopper Capacity	100 kg	100 kg
Oil Tank Volume	1,800 L	1,500 L

Type 22 injection units

Parameter	injection unit 1 i9500	injection unit 2 i5800
Screw Diameter	100 mm	85 mm
Shot Volume	4,318 cm³	2,683 cm³
Shot Weight (PS)	3,929 g	2,441 g
Injection Pressure	213 MPa	203 MPa
Injection Rate	924 g/s	796 g/s
Max Injection Speed	129 mm/s	154 mm/s
Injection Stroke	550 mm	473 mm
Screw Speed	120 rpm	120 rpm
Heater Power	78 kW	55 kW
Hopper Capacity	100 kg	100 kg
Oil Tank Volume	1,800 L	1,500 L

Variants (2)

Type 1

Parameter	Variant A	Variant B
ID	i7500	i5800
Screw Diameter	85 mm	80 mm
Shot Volume	2,921 cm³	2,376 cm³
Shot Weight (PS)	2,658 g	2,162 g
Injection Pressure	249 MPa	229 MPa
Injection Rate	789 g/s	705 g/s

Type 2

Parameter	Variant A	Variant B
ID	i9500	i5800
Screw Diameter	100 mm	85 mm
Shot Volume	4,318 cm³	2,683 cm³
Shot Weight (PS)	3,929 g	2,441 g
Injection Pressure	213 MPa	203 MPa
Injection Rate	924 g/s	796 g/s

Equipment & Options

Standard

Optional

—Not Available

Platen with T slots

Platen with tapped holes

Platen (according to EUROMAP 2)

High rigidity 5 points-double toggle structure

Mechanical safety

Electrical safety

Hydraulic safety

Auto-mold height adjustment function

Mold open, closing and mold adjusting controlled by transducer

Fix-quantity type auto central lubrication system

Mechanical adjust support for moving platen

High rigidity steel wear strips for moving platen

Auto safety door

EUROMAP 18 robot interface

Widened door and covers

Safety pressure plate under mold area

Two water regulation manifolds

Quick coupling for water regulator

Two air blow circuits

Four air blow circuits

Glass water flow regulators

Low pressure mold protection

Standard screw

Specialized screw and barrel

Shut off nozzle

Double cylinder injection

Double carriage cylinder injection unit

Carriage transducer

Screw rotation speed display

Hydraulic plasticizing

Electrical plasticizing

Proportional back pressure control

Closed-loop control of the temperature at the discharge port

Barrel insulation cover

Nozzle cover

Self-lock valve for carriage

Material loading platform

Manual central lubricating device for carriage

Carriage central auto lubrication device

Ceramic heating band

Screw mobile feed hopper

Gas-assisted injection interface

Hopper dryer

Stainless hopper

Barrel insulation device

Equipment & Options

Standard

Optional

—Not Available

Clamping Unit(22)

Platen with T slots

Platen with tapped holes

Platen (according to EUROMAP 2)

High rigidity 5 points-double toggle structure

Mechanical safety

Electrical safety

Hydraulic safety

Auto-mold height adjustment function

Mold open, closing and mold adjusting controlled by transducer

Fix-quantity type auto central lubrication system

Mechanical adjust support for moving platen

High rigidity steel wear strips for moving platen

Auto safety door

EUROMAP 18 robot interface

Widened door and covers

Safety pressure plate under mold area

Two water regulation manifolds

Quick coupling for water regulator

Two air blow circuits

Four air blow circuits

Glass water flow regulators

Low pressure mold protection

Injection Unit(23)

Standard screw

Specialized screw and barrel

Shut off nozzle

Double cylinder injection

Double carriage cylinder injection unit

Carriage transducer

Screw rotation speed display

Hydraulic plasticizing

Electrical plasticizing

Proportional back pressure control

Closed-loop control of the temperature at the discharge port

Barrel insulation cover

Nozzle cover

Self-lock valve for carriage

Material loading platform

Manual central lubricating device for carriage

Carriage central auto lubrication device

Ceramic heating band

Screw mobile feed hopper

Gas-assisted injection interface

Hopper dryer

Stainless hopper

Barrel insulation device

Electrical System(31)

KEBA controller

KEBA 15-inch touch screen

Memory with 200 sets of mold parameters

All action instant monitoring

Production monitoring

Failure alarm display

Changeover from injection fill to hold by injection pressure

I/O monitoring display

3 color light (with buzzer)

Motor overload protection

Front/back door emergency stop switch

5 pins socket of 380V/32A, 2 groups

5 pins socket of 380V/16A, 1 group

3 pins socket of 230V/16A, 1 group

Transformer for servomotor system

EUROMAP 13 neutron connection

EUROMAP 12 robot interface

EUROMAP 67 robot interface

Double protection for heating

Safety relay monitoring

SSR heating control

Hot runner control system & interface

Instant power consumption monitoring

Instant clamping force monitoring

230V/10A Industrial plug

Electrical cabinet lighting device

Remote control

Close-loop control for mold open/close

Safety pedal monitoring

Open-phase protection

Inspection of repair door

Hydraulic System(26)

Fast response servo system

Increased motor-pump unit

Independent cooling system

Independent filtration system

Pressure control for injection to hold on pressure

Programmable injection sequence

Fast injection with accumulator

Carriage self-lock valve

Proportional injection valve

Injection servo valve

Oil temp. detector

Oil level alarm

Anti-explosive chain

Self-lock suction oil filter

Control of oil temperature and cold water valve

Two core pull circuits on moving platen

Two core pull circuit on moving platen, two core pull circuit on fixed

Sequence valve

Fast molding closing device

Quick clamping device

Ejector on-the-fly

Hydraulic safety device

Plasticize on-the-fly

Plasticizing & ejector on the fly

Proportional valve control for clamp open and close

Servo valve control for clamp open and close

Other Equipment(14)

Standard tederic color

Shock-proof pad

Foundation steel plate, Foundation anchor bolts

Spare parts, regular tools, mold clamper, extended nozzle, operation manual

High base

Robot

Magnet (for hopper dryer)

Chiller

Mould temp controller

Dehumidifier

Autoloader

Fumigated wooden packaging

With full-tank hydraulic oil

Products fetching platform

Similar Machines by Clamping Force

Other Tederic models with clamping force around 19200 kN from different series.

NEO·HII Series

H2000II

20000 kN(2000t)

Two-Platen

3 screw variants

DT Series

D1800

18000 kN(1800t)

Toggle Clamp

3 screw variants

J type Series

DT1800/JI75000

18000 kN(1800t)

Hydraulic

1 screw variants

J type Series

DT1800/JI75000

18000 kN(1800t)

Hydraulic

1 screw variants

Compare machines from different series to find the best fit for your needs.

Learn more about injection molding technology and best practices.

NEO·M Series M1920s - Technical Specifications

M1920s

Clamping Unit: M1920s

Multi-Component Injection Units

Variants (2)

Type 1

Type 2

Equipment & Options

Equipment & Options

Similar Machines by Clamping Force

H2000II

D1800

DT1800/JI75000

DT1800/JI75000

Related Articles

Insert Molding & In-Mold Electronics

Complete Guide to Injection Molding Machines

Injection Molding Defects: Identification & Solutions

M1920s

NEO·M Series M1920s Machine Overview

Clamping Unit: M1920s

Multi-Component Injection Units

Variants (2)

Type 1

Type 2

Equipment & Options

Clamping Unit(22)

Injection Unit(23)

Electrical System(31)

Hydraulic System(26)

Other Equipment(14)

Equipment & Options

Similar Machines by Clamping Force

H2000II

D1800

DT1800/JI75000

DT1800/JI75000

Related Articles

Insert Molding & In-Mold Electronics

Complete Guide to Injection Molding Machines

Injection Molding Defects: Identification & Solutions