TEDESolutions
NEO·HII Series H550II - Technical Specifications
December 15, 2025
TEDESolutions sp. z o.o. | ul. Stolarska 6C, 86-021 Maksymilianowo | +48 507 161 780 | biuro@tedesolutions.pl | www.tedesolutions.pl
5,500
kN
3
Variants
21
t
NEO·HII Series H550II Machine Overview
Tederic NEO·HII Series H550II two-platen injection molding machine with a clamping force of 5500 kN (550 metric tons). This is a smaller capacity machine within the NEO·HII Series series.
This model offers 3 screw diameter options (75mm, 80mm, 85mm). Shot weight (PS) ranges from 1624g to 2086g. Injection pressure from 159.9 MPa to 205.3 MPa. Injection rate from 496 g/s to 638 g/s.
Mold opening stroke: 1300mm. Tie bar spacing: 920×830mm (width × height). Maximum daylight: 1650mm. Mold height range: 350mm to 900mm.
Overall machine dimensions: 7.5×2.5×2.8 m (L×W×H). Machine weight: 21 t.
The NEO·HII Series series includes 15 models with clamping forces from 5500 kN to 45000 kN (550-4500 metric tons). A total of 89 injection unit configurations are available in this series.
Ideal for large automotive parts, industrial packaging, and construction components molding.
Clamping Unit: H550II
Clamping Force
5,500 kN
Mold Opening Stroke
1,300 mm
Max Mold Height
900 mm
Min Mold Height
350 mm
Tie Bar Spacing
920 × 830 mm
Platen Dimensions (W×H)
1275 × 1275 mm
Min. Mold Dimensions
640 × 580 mm
Max Daylight
1,650 mm
Ejector Stroke
260 mm
Ejector Force
124 kN
Ejector Pins
11
Machine Weight
21.0 t
Overall Dimensions (L×W×H)
7.5 × 2.5 × 2.8 m
Injection Unit: i3800
Standard / High Power
Max Injection Speed
123 mm/s
Injection Stroke
404 mm
Screw Speed
165 rpm
Max Pump Pressure
17.5 MPa
Pump Motor Power
40+40 kW
Heater Power
37 / 46 kW
Hopper Capacity
50 kg
Oil Tank Volume
590 L
Variants (3)
Injection Unit: i3800
| Parameter | Variant A | Variant B | Variant C |
|---|---|---|---|
| Screw Diameter | 75 mm | 80 mm | 85 mm |
| L/D Ratio | 23.5 | 22 | 20.7 |
| Shot Volume | 1,785 cm³ | 2,031 cm³ | 2,293 cm³ |
| Shot Weight (PS) | 1,624 g | 1,848 g | 2,086 g |
| Injection Pressure | 205 MPa | 181 MPa | 160 MPa |
| Injection Rate | 496 g/s | 565 g/s | 638 g/s |
Equipment & Options
Standard
Optional
—Not Available
Platen with tapped holes
Standard
Platen with T slots
Standard
Platen (according to EUROMAP 2)
Optional
High rigid two-platen clamping unit
Standard
Mechanical safety
Optional
Electrical safety
Standard
Hydraulic safety
Standard
Auto-mold height adjustment function
Standard
Mold open, closing and mold adjusting controlled by transducer
Standard
Fix-quantity type auto central lubrication system
Standard
Mechanical adjust support for moving platen
Standard
High rigidity steel wear strips for moving platen
Standard
Auto safety door
Optional
EUROMAP 18 robot interface
Standard
Magnetic platen
Optional
Hydraulic/electrical unscrew device
Optional
Widened door and covers
Standard
Safety pressure plate under mold area
Optional
Two water regulation manifolds
Standard
Quick coupling for water regulator
Standard
Two air blow circuits
Standard
Four air blow circuits
Optional
Glass water flow regulators
Optional
Self-lock valve for locking
Standard
Buffer lock brake control
Standard
Standard screw
Standard
Specialized screw and barrel
Optional
Shut off nozzle
Optional
Double cylinder injection
Standard
Double carriage cylinder injection unit
Standard
Carriage transducer
Standard
Screw rotation speed display
Standard
Hydraulic plasticizing
Standard
Electrical plasticizing
Optional
Proportional back pressure control
Standard
Closed-loop control of the temperature at the discharge port
Standard
Barrel insulation cover
Standard
Nozzle cover
Standard
Self-lock valve for carriage
Standard
Material loading platform
Standard
Manual central lubricating device for carriage
Standard
Carriage central auto lubrication device
Standard
Stainless heater bands
Optional
Ceramic heating band
Optional
Screw mobile feed hopper
Standard
Gas-assisted injection interface
Optional
Foam moulding
Optional
Hopper dryer
Optional
Stainless hopper
Standard
Barrel insulation device
Optional
Equipment & Options
Standard
Optional
—Not Available
Clamping Unit(25)
Platen with tapped holes
Standard
Platen with T slots
Standard
Platen (according to EUROMAP 2)
Optional
High rigid two-platen clamping unit
Standard
Mechanical safety
Optional
Electrical safety
Standard
Hydraulic safety
Standard
Auto-mold height adjustment function
Standard
Mold open, closing and mold adjusting controlled by transducer
Standard
Fix-quantity type auto central lubrication system
Standard
Mechanical adjust support for moving platen
Standard
High rigidity steel wear strips for moving platen
Standard
Auto safety door
Optional
EUROMAP 18 robot interface
Standard
Magnetic platen
Optional
Hydraulic/electrical unscrew device
Optional
Widened door and covers
Standard
Safety pressure plate under mold area
Optional
Two water regulation manifolds
Standard
Quick coupling for water regulator
Standard
Two air blow circuits
Standard
Four air blow circuits
Optional
Glass water flow regulators
Optional
Self-lock valve for locking
Standard
Buffer lock brake control
Standard
Injection Unit(25)
Standard screw
Standard
Specialized screw and barrel
Optional
Shut off nozzle
Optional
Double cylinder injection
Standard
Double carriage cylinder injection unit
Standard
Carriage transducer
Standard
Screw rotation speed display
Standard
Hydraulic plasticizing
Standard
Electrical plasticizing
Optional
Proportional back pressure control
Standard
Closed-loop control of the temperature at the discharge port
Standard
Barrel insulation cover
Standard
Nozzle cover
Standard
Self-lock valve for carriage
Standard
Material loading platform
Standard
Manual central lubricating device for carriage
Standard
Carriage central auto lubrication device
Standard
Stainless heater bands
Optional
Ceramic heating band
Optional
Screw mobile feed hopper
Standard
Gas-assisted injection interface
Optional
Foam moulding
Optional
Hopper dryer
Optional
Stainless hopper
Standard
Barrel insulation device
Optional
Electrical System(31)
KEBA controller
Standard
KEBA 15-inch touch screen
Standard
Memory with 200 sets of mold parameters
Standard
All action instant monitoring
Standard
Production monitoring
Standard
Failure alarm display
Standard
Changeover from injection fill to hold by injection pressure
Optional
I/O monitoring display
Standard
3 color light (with buzzer)
Standard
Motor overload protection
Standard
Front/back door emergency stop switch
Standard
5 pins socket of 380V/32A, 2 groups
Standard
5 pins socket of 380V/16A, 1 group
Standard
3 pins socket of 230V/16A, 1 group
Standard
Transformer for servomotor system
Optional
EUROMAP 13 neutron connection
Standard
EUROMAP 12 robot interface
Standard
EUROMAP 67 robot interface
Optional
Double protection for heating
Standard
Safety relay monitoring
Standard
SSR heating control
Standard
Hot runner control system & interface
Optional
Instant power consumption monitoring
Standard
Instant clamping force monitoring
Standard
230V/10A Industrial plug
Standard
Electrical cabinet lighting device
Standard
Remote control
Optional
Close-loop control for mold open/close
Standard
Safety pedal monitoring
Optional
Open-phase protection
Standard
Inspection of repair door
Standard
Hydraulic System(27)
Fast response servo system
Standard
Increased motor-pump unit
Standard
Independent cooling system
Standard
Independent filtration system
Optional
Pressure control for injection to hold on pressure
Standard
Programmable injection sequence
Optional
Fast injection with accumulator
Standard
Carriage self-lock valve
Optional
Proportional injection valve
Optional
Injection servo valve
Standard
Oil temp. detector
Standard
Oil level alarm
Standard
Anti-explosive chain
Standard
Self-lock suction oil filter
Standard
Control of oil temperature and cold water valve
Standard
Two core pull circuits on moving platen
Standard
Two core pull circuit on moving platen, two core pull circuit on fixed
Optional
Sequence valve
Standard
Fast molding closing device
Standard
Quick clamping device
Standard
Ejector on-the-fly
Standard
Low pressure mold protection
Standard
Hydraulic safety device
Standard
Plasticize on-the-fly
Optional
Plasticizing & ejector on the fly
Standard
Proportional valve control for clamp open and close
Standard
Servo valve control for clamp open and close
Optional
Other Equipment(14)
Standard tederic color
Standard
Shock-proof pad
Standard
Foundation steel plate, Foundation anchor bolts
Optional
Spare parts, regular tools, mold clamper, extended nozzle, operation manual
Standard
High base
Optional
Robot
Optional
Magnet (for hopper dryer)
Optional
Chiller
Optional
Mould temp controller
Optional
Dehumidifier
Optional
Autoloader
Optional
Fumigated wooden packaging
Optional
With full-tank hydraulic oil
Optional
Products fetching platform
—Not Available
Similar Machines by Clamping Force
Other Tederic models with clamping force around 5500 kN from different series.
NEO·EII Series
E560II
5600 kN(560t)
All-Electric
18 screw variants
DE-C SeriesDE568
5680 kN(568t)
All-Electric
9 screw variants
NEO T lite SeriesT530
5300 kN(530t)
Toggle Clamp
3 screw variants
DE SeriesDE585
5850 kN(585t)
All-Electric
1 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Complete Guide to Injection Molding Machines
Comprehensive overview of machine types, selection criteria, and key specifications.
Read moreTCO & Energy Efficiency in Injection Molding
Total cost of ownership analysis and energy-saving strategies for modern machines.
Read moreInjection Molds & Precision Molding
Mold design principles and precision molding techniques for high-quality parts.
Read more