NEO·EII Series E60II - Technical Specifications
NEO·EII Series E60II Machine Overview
Tederic NEO·EII Series E60II all-electric servo-driven injection molding machine with a clamping force of 600 kN (60 metric tons). This is a smaller capacity machine within the NEO·EII Series series.
This model offers 12 screw diameter options (20mm, 20mm, 22mm, 22mm, 22mm, 22mm, 25mm, 25mm, 25mm, 25mm, 28mm, 28mm). Shot weight (PS) ranges from 27g to 59g. Injection pressure from 170 MPa to 284 MPa. Injection rate from 114 g/s to 224 g/s.
Mold opening stroke: 270mm. Tie bar spacing: 360×320mm (width × height). Maximum daylight: 650mm. Mold height range: 150mm to 380mm.
Overall machine dimensions: 4.3×1.3×1.9 m (L×W×H). Machine weight: 3.6 t.
The NEO·EII Series series includes 14 models with clamping forces from 600 kN to 14000 kN (60-1400 metric tons). A total of 210 injection unit configurations are available in this series.
Ideal for precision medical, electronic, and optical components requiring the highest cleanliness.
Clamping Unit: E60II
Injection Unit: e80/e80h/e110/e110h (h = high speed)
Variants (12)
Injection Unit: e80
| Parameter | Variant A | Variant B | Variant C |
|---|---|---|---|
| Screw Diameter | 20 mm | 22 mm | 25 mm |
| L/D Ratio | 22 | 20 | 17.6 |
| Shot Volume | 30 cm³ | 36 cm³ | 46 cm³ |
| Shot Weight (PS) | 27 g | 33 g | 42 g |
| Injection Pressure | 266 MPa | 220 MPa | 170 MPa |
| Holding Pressure | 213 MPa | 176 MPa | 136 MPa |
| Injection Rate | — | — | — |
Injection Unit: e80h (h = high speed)
| Parameter | Variant A | Variant B | Variant C |
|---|---|---|---|
| Screw Diameter | 20 mm | 22 mm | 25 mm |
| L/D Ratio | 22 | 20 | 17.6 |
| Shot Volume | 30 cm³ | 36 cm³ | 46 cm³ |
| Shot Weight (PS) | 27 g | 33 g | 42 g |
| Injection Pressure | 266 MPa | 220 MPa | 170 MPa |
| Holding Pressure | 213 MPa | 176 MPa | 136 MPa |
| Injection Rate | 114 g/s | 138 g/s | 179 g/s |
Injection Unit: e110
| Parameter | Variant A | Variant B | Variant C |
|---|---|---|---|
| Screw Diameter | 22 mm | 25 mm | 28 mm |
| L/D Ratio | 22.7 | 20 | 17.9 |
| Shot Volume | 40 cm³ | 52 cm³ | 65 cm³ |
| Shot Weight (PS) | 36 g | 47 g | 59 g |
| Injection Pressure | 284 MPa | 220 MPa | 175 MPa |
| Holding Pressure | 227 MPa | 176 MPa | 140 MPa |
| Injection Rate | — | — | — |
Injection Unit: e110h (h = high speed)
| Parameter | Variant A | Variant B | Variant C |
|---|---|---|---|
| Screw Diameter | 22 mm | 25 mm | 28 mm |
| L/D Ratio | 22.7 | 20 | 17.9 |
| Shot Volume | 40 cm³ | 52 cm³ | 65 cm³ |
| Shot Weight (PS) | 36 g | 47 g | 59 g |
| Injection Pressure | 284 MPa | 220 MPa | 175 MPa |
| Holding Pressure | 227 MPa | 176 MPa | 140 MPa |
| Injection Rate | 138 g/s | 179 g/s | 224 g/s |
Equipment & Options
Equipment & Options
Similar Machines by Clamping Force
Other Tederic models with clamping force around 600 kN from different series.
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Micro-Injection Molding for Medical Components
Specialized techniques for producing precision medical microcomponents.
Read moreAutomation & Industry 4.0 in Injection Molding
Smart factory integration, automation systems, and digital transformation.
Read moreTCO & Energy Efficiency in Injection Molding
Total cost of ownership analysis and energy-saving strategies for modern machines.
Read more