NEO·EII Series E120II - Technical Specifications
NEO·EII Series E120II Machine Overview
Tederic NEO·EII Series E120II all-electric servo-driven injection molding machine with a clamping force of 1200 kN (120 metric tons). This is a smaller capacity machine within the NEO·EII Series series.
This model offers 18 screw diameter options (25mm, 25mm, 28mm, 28mm, 28mm, 28mm, 32mm, 32mm, 32mm, 32mm, 35mm, 35mm, 35mm, 35mm, 38mm, 38mm, 42mm, 42mm). Shot weight (PS) ranges from 54g to 202g. Injection pressure from 164 MPa to 276 MPa. Injection rate from 80 g/s to 504 g/s.
Mold opening stroke: 360mm. Tie bar spacing: 470×420mm (width × height). Maximum daylight: 840mm. Mold height range: 160mm to 480mm.
Overall machine dimensions: 4.9×1.5×2.1 m (L×W×H). Machine weight: 5.9 t.
The NEO·EII Series series includes 14 models with clamping forces from 600 kN to 14000 kN (60-1400 metric tons). A total of 210 injection unit configurations are available in this series.
Ideal for precision medical, electronic, and optical components requiring the highest cleanliness.
Clamping Unit: E120II
Injection Unit: e160/e160h/e220/e220h/e360/e360h (h = high speed)
Variants (18)
Injection Unit: e160
| Parameter | Variant A | Variant B | Variant C |
|---|---|---|---|
| Screw Diameter | 25 mm | 28 mm | 32 mm |
| L/D Ratio | 22.4 | 20 | 17.5 |
| Shot Volume | 59 cm³ | 74 cm³ | 97 cm³ |
| Shot Weight (PS) | 54 g | 67 g | 88 g |
| Injection Pressure | 276 MPa | 220 MPa | 168 MPa |
| Holding Pressure | 221 MPa | 176 MPa | 135 MPa |
| Injection Rate | 80 g/s | 112 g/s | 147 g/s |
Injection Unit: e160h (h = high speed)
| Parameter | Variant A | Variant B | Variant C |
|---|---|---|---|
| Screw Diameter | 25 mm | 28 mm | 32 mm |
| L/D Ratio | 22.4 | 20 | 17.5 |
| Shot Volume | 59 cm³ | 74 cm³ | 97 cm³ |
| Shot Weight (PS) | 54 g | 67 g | 88 g |
| Injection Pressure | 276 MPa | 220 MPa | 168 MPa |
| Holding Pressure | 221 MPa | 176 MPa | 135 MPa |
| Injection Rate | 179 g/s | 224 g/s | 293 g/s |
Injection Unit: e220
| Parameter | Variant A | Variant B | Variant C |
|---|---|---|---|
| Screw Diameter | 28 mm | 32 mm | 35 mm |
| L/D Ratio | 23 | 20 | 18.3 |
| Shot Volume | 83 cm³ | 109 cm³ | 130 cm³ |
| Shot Weight (PS) | 76 g | 99 g | 118 g |
| Injection Pressure | 261 MPa | 200 MPa | 167 MPa |
| Holding Pressure | 209 MPa | 160 MPa | 134 MPa |
| Injection Rate | 112 g/s | 147 g/s | 175 g/s |
Injection Unit: e220h (h = high speed)
| Parameter | Variant A | Variant B | Variant C |
|---|---|---|---|
| Screw Diameter | 28 mm | 32 mm | 35 mm |
| L/D Ratio | 23 | 20 | 18.3 |
| Shot Volume | 83 cm³ | 109 cm³ | 130 cm³ |
| Shot Weight (PS) | 76 g | 99 g | 118 g |
| Injection Pressure | 261 MPa | 200 MPa | 167 MPa |
| Holding Pressure | 209 MPa | 160 MPa | 134 MPa |
| Injection Rate | 224 g/s | 293 g/s | 350 g/s |
Injection Unit: e360
| Parameter | Variant A | Variant B | Variant C |
|---|---|---|---|
| Screw Diameter | 35 mm | 38 mm | 42 mm |
| L/D Ratio | 21.7 | 20 | 18.1 |
| Shot Volume | 154 cm³ | 181 cm³ | 222 cm³ |
| Shot Weight (PS) | 140 g | 165 g | 202 g |
| Injection Pressure | 236 MPa | 200 MPa | 164 MPa |
| Holding Pressure | 189 MPa | 160 MPa | 131 MPa |
| Injection Rate | 175 g/s | 206 g/s | 252 g/s |
Injection Unit: e360h (h = high speed)
| Parameter | Variant A | Variant B | Variant C |
|---|---|---|---|
| Screw Diameter | 35 mm | 38 mm | 42 mm |
| L/D Ratio | 21.7 | 20 | 18.1 |
| Shot Volume | 154 cm³ | 181 cm³ | 222 cm³ |
| Shot Weight (PS) | 140 g | 165 g | 202 g |
| Injection Pressure | 236 MPa | 200 MPa | 164 MPa |
| Holding Pressure | 189 MPa | 160 MPa | 131 MPa |
| Injection Rate | 350 g/s | 413 g/s | 504 g/s |
Equipment & Options
Equipment & Options
Similar Machines by Clamping Force
Other Tederic models with clamping force around 1200 kN from different series.
D130
1300 kN(130t)
Toggle Clamp
3 screw variants
NEO·T SeriesT130
1300 kN(130t)
Toggle Clamp
3 screw variants
NEO T lite SeriesT130
1300 kN(130t)
Toggle Clamp
3 screw variants
DE SeriesDE110
1100 kN(110t)
All-Electric
6 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Micro-Injection Molding for Medical Components
Specialized techniques for producing precision medical microcomponents.
Read moreAutomation & Industry 4.0 in Injection Molding
Smart factory integration, automation systems, and digital transformation.
Read moreTCO & Energy Efficiency in Injection Molding
Total cost of ownership analysis and energy-saving strategies for modern machines.
Read more