DT Series D500 - Technical Specifications
DT Series D500 Machine Overview
Tederic DT Series D500 toggle clamp injection molding machine with a clamping force of 5000 kN (500 metric tons). This is a smaller capacity machine within the DT Series series.
This model offers 3 screw diameter options (75mm, 80mm, 85mm). Shot weight (PS) ranges from 1624g to 2086g. Injection pressure from 169 MPa to 217 MPa. Injection rate from 373 g/s to 479 g/s.
Mold opening stroke: 840mm. Tie bar spacing: 820×820mm (width × height). Maximum daylight: 1640mm. Mold height range: 320mm to 800mm.
Overall machine dimensions: 8.69×2.09×2.57 m (L×W×H). Machine weight: 19.8 t.
The DT Series series includes 19 models with clamping forces from 1000 kN to 40000 kN (100-4000 metric tons). A total of 59 injection unit configurations are available in this series.
Ideal for packaging, household appliances, and medium-sized technical parts molding.
Clamping Unit: D500
Injection Unit: i3800
Standard / High Power
Variants (3)
| Parameter | Variant A | Variant B | Variant C |
|---|---|---|---|
| Screw Diameter | 75 mm | 80 mm | 85 mm |
| L/D Ratio | 23.5 | 22 | 20.7 |
| Shot Volume | 1,785 cm³ | 2,031 cm³ | 2,293 cm³ |
| Shot Weight (PS) | 1,624 g | 1,848 g | 2,086 g |
| Injection Pressure | 217 MPa | 190 MPa | 169 MPa |
| Injection Rate(Standard / High Power) | 373 / 429 g/s | 424 / 488 g/s | 479 / 550 g/s |
Similar Machines by Clamping Force
Other Tederic models with clamping force around 5000 kN from different series.
T500
5000 kN(500t)
Toggle Clamp
3 screw variants
NEO T lite SeriesT500
5000 kN(500t)
Toggle Clamp
3 screw variants
J type SeriesDT500/JI15000
5000 kN(500t)
Hydraulic
1 screw variants
J type SeriesDT500/JI15000
5000 kN(500t)
Hydraulic
1 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Complete Guide to Injection Molding Machines
Comprehensive overview of machine types, selection criteria, and key specifications.
Read moreProduction Cycle Optimization
Strategies to improve efficiency and reduce cycle times in injection molding.
Read moreInjection Molding Defects: Identification & Solutions
Common defects, their causes, and practical solutions for quality improvement.
Read more