DT Series D2800 - Technical Specifications
DT Series D2800 Machine Overview
Tederic DT Series D2800 toggle clamp injection molding machine with a clamping force of 28000 kN (2800 metric tons). This is a larger capacity machine within the DT Series series.
This model offers 4 screw diameter options (200mm, 210mm, 220mm, 230mm). Shot weight (PS) ranges from 35993g to 47600g. Injection pressure from 141.5 MPa to 187.2 MPa. Injection rate from 1751 g/s to 2316 g/s.
Mold opening stroke: 2050mm. Tie bar spacing: 2000×1750mm (width × height). Maximum daylight: 3950mm. Mold height range: 500mm to 1900mm.
Overall machine dimensions: 22.3×4.2×4.8 m (L×W×H). Machine weight: 228 t.
The DT Series series includes 19 models with clamping forces from 1000 kN to 40000 kN (100-4000 metric tons). A total of 59 injection unit configurations are available in this series.
Ideal for packaging, household appliances, and medium-sized technical parts molding.
Clamping Unit: D2800
Injection Unit: i66600
Variants (4)
| Parameter | Variant A | Variant B | Variant C | Variant D |
|---|---|---|---|---|
| Screw Diameter | 200 mm | 210 mm | 220 mm | 230 mm |
| L/D Ratio | 23.1 | 22 | 21 | 20.1 |
| Shot Volume | 39,553 cm³ | 43,607 cm³ | 47,859 cm³ | 52,308 cm³ |
| Shot Weight (PS) | 35,993 g | 39,682 g | 43,552 g | 47,600 g |
| Injection Pressure | 187 MPa | 170 MPa | 155 MPa | 142 MPa |
| Injection Rate | 1751 g/s | 1931 g/s | 2119 g/s | 2316 g/s |
Similar Machines by Clamping Force
Other Tederic models with clamping force around 28000 kN from different series.
M2820v
28200 kN(2820t)
Multi-Component
2 screw variants
NEO·HII SeriesH2850II
28500 kN(2850t)
Two-Platen
12 screw variants
NEO·HII SeriesH2850II wp
28500 kN(2850t)
Two-Platen
12 screw variants
NEO·M SeriesM2720s
27200 kN(2720t)
Multi-Component
2 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Complete Guide to Injection Molding Machines
Comprehensive overview of machine types, selection criteria, and key specifications.
Read moreProduction Cycle Optimization
Strategies to improve efficiency and reduce cycle times in injection molding.
Read moreInjection Molding Defects: Identification & Solutions
Common defects, their causes, and practical solutions for quality improvement.
Read more