DT Series D1050 - Technical Specifications
DT Series D1050 Machine Overview
Tederic DT Series D1050 toggle clamp injection molding machine with a clamping force of 10500 kN (1050 metric tons). This is a smaller capacity machine within the DT Series series.
This model offers 3 screw diameter options (100mm, 110mm, 120mm). Shot weight (PS) ranges from 3931g to 5660g. Injection pressure from 152.9 MPa to 220.2 MPa. Injection rate from 618 g/s to 891 g/s.
Mold opening stroke: 1230mm. Tie bar spacing: 1160×1160mm (width × height). Maximum daylight: 2390mm. Mold height range: 500mm to 1160mm.
Overall machine dimensions: 12×2.6×3 m (L×W×H). Machine weight: 48.2 t.
The DT Series series includes 19 models with clamping forces from 1000 kN to 40000 kN (100-4000 metric tons). A total of 59 injection unit configurations are available in this series.
Ideal for packaging, household appliances, and medium-sized technical parts molding.
Clamping Unit: D1050
Injection Unit: i9500
Standard / High Power
Variants (3)
| Parameter | Variant A | Variant B | Variant C |
|---|---|---|---|
| Screw Diameter | 100 mm | 110 mm | 120 mm |
| L/D Ratio | 24.2 | 22 | 20.2 |
| Shot Volume | 4,320 cm³ | 5,227 cm³ | 6,220 cm³ |
| Shot Weight (PS) | 3,931 g | 4,757 g | 5,660 g |
| Injection Pressure | 220 MPa | 182 MPa | 153 MPa |
| Injection Rate(Standard / High Power) | 618 / 756 g/s | 748 / 915 g/s | 891 / 1089 g/s |
Similar Machines by Clamping Force
Other Tederic models with clamping force around 10500 kN from different series.
T1050
10500 kN(1050t)
Toggle Clamp
3 screw variants
J type SeriesDT1050/JI42000
10500 kN(1050t)
Hydraulic
1 screw variants
J type SeriesDT1050/JI42000
10500 kN(1050t)
Hydraulic
1 screw variants
NEO·HII SeriesH1080II
10800 kN(1080t)
Two-Platen
6 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Complete Guide to Injection Molding Machines
Comprehensive overview of machine types, selection criteria, and key specifications.
Read moreProduction Cycle Optimization
Strategies to improve efficiency and reduce cycle times in injection molding.
Read moreInjection Molding Defects: Identification & Solutions
Common defects, their causes, and practical solutions for quality improvement.
Read more