NEO T lite Series T500 - Технически характеристики
T500
Шприц машина с коленчато-лостов механизъм Lite
Преглед на шприц машина NEO T lite Series T500
Tederic NEO T lite Series T500 коленчато-лостова шприц машина със затваряща сила 5000 kN (500 metric tons). This is a mid-range capacity machine within the NEO T lite Series series.
This model offers 3 screw diameter options (75mm, 80mm, 85mm). Shot weight (PS) ranges from 1624g to 2086g. Injection pressure from 159.9 MPa to 205.3 MPa. Injection rate from 393 g/s to 505 g/s.
Mold opening stroke: 800mm. Tie bar spacing: 820×820mm (width × height). Maximum daylight: 1600mm. Mold height range: 320mm to 800mm.
Overall machine dimensions: 8.1×2.17×2.65 m (L×W×H). Machine weight: 19.8 t.
The NEO T lite Series series includes 16 models with clamping forces from 900 kN to 10000 kN (90-1000 metric tons). A total of 48 injection unit configurations are available in this series.
Идеална за формоване на опаковки, домакински уреди и средни технически части.
Затварящ Възел: T500
Инжекционен блок: i3800
Варианти (3)
| Параметър | Вариант A | Вариант B | Вариант C |
|---|---|---|---|
| Диаметър на шнека | 75 mm | 80 mm | 85 mm |
| Съотношение L/D | 23.5 | 22 | 20.7 |
| Обем на впръскване | 1,785 cm³ | 2,031 cm³ | 2,293 cm³ |
| Тегло на впръскване (PS) | 1,624 g | 1,848 g | 2,086 g |
| Налягане на впръскване | 205 MPa | 181 MPa | 160 MPa |
| Скорост на впръскване | 393 g/s | 447 g/s | 505 g/s |
Similar Machines by Clamping Force
Other Tederic models with clamping force around 5000 kN from different series.
D500
5000 kN(500t)
Toggle Clamp
3 screw variants
NEO·T SeriesT500
5000 kN(500t)
Toggle Clamp
3 screw variants
J type SeriesDT500/JI15000
5000 kN(500t)
Hydraulic
1 screw variants
J type SeriesDT500/JI15000
5000 kN(500t)
Hydraulic
1 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Complete Guide to Injection Molding Machines
Comprehensive overview of machine types, selection criteria, and key specifications.
Read moreProduction Cycle Optimization
Strategies to improve efficiency and reduce cycle times in injection molding.
Read moreInjection Molding Defects: Identification & Solutions
Common defects, their causes, and practical solutions for quality improvement.
Read more