NEO T lite Series T400 - Технически характеристики
T400
Шприц машина с коленчато-лостов механизъм Lite
Преглед на шприц машина NEO T lite Series T400
Tederic NEO T lite Series T400 коленчато-лостова шприц машина със затваряща сила 4000 kN (400 metric tons). This is a mid-range capacity machine within the NEO T lite Series series.
This model offers 3 screw diameter options (65mm, 70mm, 75mm). Shot weight (PS) ranges from 1057g to 1407g. Injection pressure from 161.8 MPa to 215.4 MPa. Injection rate from 305 g/s to 405 g/s.
Mold opening stroke: 720mm. Tie bar spacing: 760×710mm (width × height). Maximum daylight: 1470mm. Mold height range: 280mm to 750mm.
Overall machine dimensions: 7.4×2.11×2.46 m (L×W×H). Machine weight: 15.5 t.
The NEO T lite Series series includes 16 models with clamping forces from 900 kN to 10000 kN (90-1000 metric tons). A total of 48 injection unit configurations are available in this series.
Идеална за формоване на опаковки, домакински уреди и средни технически части.
Затварящ Възел: T400
Инжекционен блок: i2500
Варианти (3)
| Параметър | Вариант A | Вариант B | Вариант C |
|---|---|---|---|
| Диаметър на шнека | 65 mm | 70 mm | 75 mm |
| Съотношение L/D | 23.7 | 22 | 20.5 |
| Обем на впръскване | 1,161 cm³ | 1,347 cm³ | 1,546 cm³ |
| Тегло на впръскване (PS) | 1,057 g | 1,226 g | 1,407 g |
| Налягане на впръскване | 215 MPa | 186 MPa | 162 MPa |
| Скорост на впръскване | 305 g/s | 353 g/s | 405 g/s |
Similar Machines by Clamping Force
Other Tederic models with clamping force around 4000 kN from different series.
D400
4000 kN(400t)
Toggle Clamp
3 screw variants
NEO·T SeriesT400
4000 kN(400t)
Toggle Clamp
3 screw variants
J type SeriesDT400/JI8200
4000 kN(400t)
Hydraulic
1 screw variants
J type SeriesDT400/JI8200
4000 kN(400t)
Hydraulic
1 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Complete Guide to Injection Molding Machines
Comprehensive overview of machine types, selection criteria, and key specifications.
Read moreProduction Cycle Optimization
Strategies to improve efficiency and reduce cycle times in injection molding.
Read moreInjection Molding Defects: Identification & Solutions
Common defects, their causes, and practical solutions for quality improvement.
Read more