NEO T lite Series T1000 - Технически характеристики
T1000
Шприц машина с коленчато-лостов механизъм Lite
Преглед на шприц машина NEO T lite Series T1000
Tederic NEO T lite Series T1000 коленчато-лостова шприц машина със затваряща сила 10000 kN (1000 metric tons). This is a larger capacity machine within the NEO T lite Series series.
This model offers 3 screw diameter options (100mm, 110mm, 120mm). Shot weight (PS) ranges from 3931g to 5661g. Injection pressure from 147.8 MPa to 212.8 MPa. Injection rate from 640 g/s to 922 g/s.
Mold opening stroke: 1120mm. Tie bar spacing: 1080×1080mm (width × height). Maximum daylight: 2220mm. Mold height range: 500mm to 1100mm.
Overall machine dimensions: 11.8×2.6×3 m (L×W×H). Machine weight: 48 t.
The NEO T lite Series series includes 16 models with clamping forces from 900 kN to 10000 kN (90-1000 metric tons). A total of 48 injection unit configurations are available in this series.
Идеална за формоване на опаковки, домакински уреди и средни технически части.
Затварящ Възел: T1000
Инжекционен блок: i9500
Варианти (3)
| Параметър | Вариант A | Вариант B | Вариант C |
|---|---|---|---|
| Диаметър на шнека | 100 mm | 110 mm | 120 mm |
| Съотношение L/D | 24.2 | 22 | 20.2 |
| Обем на впръскване | 4,320 cm³ | 5,227 cm³ | 6,220 cm³ |
| Тегло на впръскване (PS) | 3,931 g | 4,756 g | 5,661 g |
| Налягане на впръскване | 213 MPa | 176 MPa | 148 MPa |
| Скорост на впръскване | 640 g/s | 775 g/s | 922 g/s |
Similar Machines by Clamping Force
Other Tederic models with clamping force around 10000 kN from different series.
D1050
10500 kN(1050t)
Toggle Clamp
3 screw variants
NEO·T SeriesT1050
10500 kN(1050t)
Toggle Clamp
3 screw variants
J type SeriesDT1050/JI42000
10500 kN(1050t)
Hydraulic
1 screw variants
J type SeriesDT1050/JI42000
10500 kN(1050t)
Hydraulic
1 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Complete Guide to Injection Molding Machines
Comprehensive overview of machine types, selection criteria, and key specifications.
Read moreProduction Cycle Optimization
Strategies to improve efficiency and reduce cycle times in injection molding.
Read moreInjection Molding Defects: Identification & Solutions
Common defects, their causes, and practical solutions for quality improvement.
Read more